watermark

5.6 Levels of assessment—Reconfiguring a lot

The following table identifies the levels of assessment for reconfiguring a lot.

Table 5.6.1—Reconfiguring a lot
Zone
Level of assessment
Assessment criteria
Impact assessment
If a reconfigured lot is:
(a) less than 300m2, where any part of the lot frontage is within 200m walking distance of any part of the lot frontage of a site or sites in a zone in the centre zones category with a combined site area of more than 2000m2; or
(b) less than 400m2, where any part of the lot frontage is greater than 200m walking distance of any part of the lot frontage of a site or sites in a zone in the centre zones category with a combined site area of more than 2,000m2; or
(c) less than 600m2, where a rear lot
The planning scheme including:
If ROL is a volumetric subdivision, where not associated with an existing or approved building
The planning scheme including:
Impact assessment
If a reconfigured lot is:
(a) less than 260m2 with no associated MCU, where in the 2 storey mix zone precinct or 2 or 3 storey mix zone precinct; or
(b) less than 180m2 with no associated MCU, where in the Up to 3 storeys zone precinct; or
(c) less than 350m2 with no associated MCU, where a rear lot in the 2 storey mix zone precinct, 2 or 3 storey mix zone precinct or Up to 3 storeys zone precinct
The planning scheme including:
If ROL is a volumetric subdivision, where not associated with an existing or approved building
The planning scheme including:
Impact assessment
If a reconfigured lot is less than 800m2
The planning scheme including:
If ROL is a volumetric subdivision, where not associated with an existing or approved building
The planning scheme including:
Impact assessment
If a reconfigured lot is less than 800m2
The planning scheme including:
If ROL is a volumetric subdivision, where not associated with an existing or approved building
The planning scheme including:
Impact assessment
If a reconfigured lot is:
(a) less than 450m2; or
(b) less than 600m2, where a rear lot
The planning scheme including:
If ROL is a volumetric subdivision, where not associated with an existing or approved building
The planning scheme including:
Impact assessment
If ROL other than a rearrangement of boundaries
The planning scheme including:
If ROL is a volumetric subdivision, where not associated with an existing or approved building
The planning scheme including:
Impact assessment
If ROL is a volumetric subdivision, where not associated with an existing or approved building
The planning scheme including:
Impact assessment
If ROL is a volumetric subdivision, where not associated with an existing or approved building
The planning scheme including:
Impact assessment
If ROL is a volumetric subdivision, where not associated with an existing or approved building
The planning scheme including:
Impact assessment
If ROL is a volumetric subdivision, where not associated with an existing or approved building
The planning scheme including:
Impact assessment
If ROL is a volumetric subdivision, where not associated with an existing or approved building
The planning scheme including:
Impact assessment
If ROL is a volumetric subdivision, where not associated with an existing or approved building
The planning scheme including:
Impact assessment
If a ROL is less than 10ha
The planning scheme including:
If ROL is a volumetric subdivision, where not associated with an existing or approved building
The planning scheme including:

Note—A minimum lot size of 100ha applies to reconfigure a lot for land in the Regional Landscape and Rural Production Area of the SEQ Regional Plan in which a large proportion of the land in this zone is located.

Impact assessment
-
The planning scheme including:
Impact assessment
If ROL is a volumetric subdivision, where not associated with an existing or approved building
The planning scheme including:
Impact assessment
If ROL is a volumetric subdivision, where not associated with an existing or approved building
The planning scheme including:
Impact assessment
If ROL is a volumetric subdivision, where not associated with an existing or approved building
The planning scheme including:
Impact assessment
If a reconfigured lot is less than 10 ha
The planning scheme including:
If ROL is a volumetric subdivision, where not associated with an existing or approved building
The planning scheme including:
Impact assessment
If ROL is a volumetric subdivision, where not associated with an existing or approved building
The planning scheme including:
Emerging community
Impact assessment
If a ROL is less than 10ha with no associated MCU
The planning scheme including:
If ROL is a volumetric subdivision, where not associated with an existing or approved building
The planning scheme including:
Extractive industry
Impact assessment
If ROL is a volumetric subdivision, where not associated with an existing or approved building
The planning scheme including:
Impact assessment
If ROL is a volumetric subdivision, where not associated with an existing or approved building
The planning scheme including:
Impact assessment
If a reconfigured lot is less than 10ha
The planning scheme including:
If ROL is a volumetric subdivision, where not associated with an existing or approved building
The planning scheme including:

Note—A minimum lot size of 100ha applies to ROL for land in the Regional Landscape and Rural Production Area of the SEQ Regional Plan in which a large proportion of the land in this zone is located.

Impact assessment
If ROL other than a rearrangement of boundaries less than 1ha
The planning scheme including:
If ROL is a volumetric subdivision, where not associated with an existing or approved building
The planning scheme including:

Note—A minimum lot size of 100ha applies to reconfigure a lot for land in the Regional Landscape and Rural Production Area of the SEQ Regional Plan in which a large proportion of the land in this zone is located.

Impact assessment
If ROL is a volumetric subdivision, where not associated with an existing or approved building
The planning scheme including:
Impact assessment
If ROL is a volumetric subdivision, where not associated with an existing or approved building
The planning scheme including:
Impact assessment
If ROL other than a rearrangement of boundaries
The planning scheme including:
If ROL is a volumetric subdivision, where not associated with an existing or approved building
The planning scheme including:
Code assessment
Any other reconfiguring a lot not listed in this table

Editor’s note—Unless listed above the default level of assessment is code assessment, unless otherwise prescribed within the Act or the Regulation.

Editor’s note—Reconfiguring a lot involving only subdivision of 1 lot into 2 lots is subject to the prescribed level of assessment in section 5.4 where in a residential zone category or industrial zone category.

^ Back to Top