watermark

5.3.3.1 City Centre

5.3.3.1.1 Location and extent

View Image

(1) The Locality Streets in the City Centre Neighbourhood Plan area are indicated on the Streetscape hierarchy overlay map and on Figure 5.3.3.1.1a.
(2) All streetscape works occurring within the Locality Streets indicated in Figure 5.3.3.1.1a, must comply with the character specified in this document.
(3) Streetscapes outside these areas may be developed in keeping with this character, at the discretion of the developer and subject to Council approval.

5.3.3.1.2 Standard footway elements and materials

(1) These locality guidelines are to be read in conjunction with Chapter 3 – Road corridor design of the Infrastructure design planning scheme policy.
(2) Footway upgrades are to include new surfacing, new or reinstated kerb and channel, driveways, pedestrian kerb crossings, tactile markers, roof water drainage line connections, service pit lids, street trees, garden beds, furniture and pedestrian lighting applicable to the streetscape type.
(3) The scope, layout and detail of the footway upgrades are to be agreed on a site by site basis through the development assessment process.

5.3.3.1.3 Streetscape hierarchy

5.3.3.1.3.1 Streetscape types overview

(1) The locality streets within the City Centre Neighbourhood Plan area are exceptions to the standard streetscape hierarchy.
(2) The streetscape type and specifications for locality streets in this area are shown in Figure 5.3.3.1.1a and outlined in this document.

5.3.3.1.3.2 Type 1 - Locality streetscape specifications

The streetscape specifications for Type 1 Locality Street are outlined in Table 5.3.3.1.3.2A.

Table 5.3.3.1.3.2A – Streetscape type and specifications
Component
Type 1 - Design specifications
Verge width
5m
Pavement width
Full width pavement
Unobstructed pavement
2.4m
Paving materials
Type: Honed coloured concrete with sawcut pattern.
Supplier: Hanson Racona (code 10040798), Boral or approved equivalent.
Colour: CCS ‘Liquorice’ 90% ‘Blue Heeler’ + 10% ‘Winter Brown’
Tactile markers
(consistent with BSD-5218)
Type: Concrete tactile pavers
Supplier: ‘Chelmstone’, ‘Urbanstone’ or approved equivalent
Colour: CCS 'Voodoo'
Driveways
Honed coloured concrete to match footway
Furniture
All furniture is to be located outside of the unobstructed pavement area.
Furniture elements and layout requirements are to be agreed on a site by site basis through the development assessment process.
Refer to 3.7.6 Design standards for street furniture for standard furniture elements and specifications.
Trees
Refer to 5.3.3.1.4 Planting.
Garden beds
No garden beds.

5.3.3.1.3.3 Type 2 - Locality streetscape specifications (Anzac Square)

The streetscape specifications for Type 2 Locality Street are outlined in Table 5.3.3.1.3.3A and shown in Figure 5.3.3.1.3.3a.

Table 5.3.3.1.3.3A – Streetscape type and specifications
Component
Type 2 - Design specifications
Verge width
5m
Pavement width
Full width pavement
Unobstructed pavement
2.4m
Paving materials - Body
Match existing.
Supplier: Boral or approved equivalent
Material: ‘Stylestone’ concrete flag paver
Colour: ‘Tan’ (003)
Size: 400mm x 400mm
Finish: honed
Band and highlight panel
Match existing.
Supplier: Boral or approved equivalent
Material: ‘Stylestone’ concrete flag paver
Colour: ‘Silver’ (015)
Size: 400mm x 400mm
Finish: honed
Tactile markers
(consistent with BSD-5218)
Type: Concrete tactile pavers
Supplier: ‘Chelmstone’, ‘Urbanstone’ or approved equivalent
Colour: CCS 'Voodoo'
Driveways
Honed coloured concrete to match footway
Furniture
All furniture is to be located outside of the unobstructed pavement area.
Furniture elements and layout requirements are to be agreed on a site by site basis through the development assessment process.
Refer to 3.7.6 Design standards for street furniture for standard furniture elements and specifications.
Trees
Garden beds
None.

View Image

5.3.3.1.3.4 Type 3 - Locality streetscape specifications (King George Square)

The streetscape specifications for Type 3 Locality Street are outlined in Table 5.3.3.1.3.4A and shown in Figure 5.3.3.1.3.4a and Figure 5.3.3.1.3.4b.

Table 5.3.3.1.3.4A – Streetscape type and specifications
Component
Type 3 - Design specifications
Verge width
As existing
Pavement width
Full width pavement
Unobstructed pavement
2.4m
Paving Type P2
Match existing.
Material: 205mm x (200,400, 600, 800)mm ‘Oyster Pearl” granite paver, flamed finish.
Highlight Pavers:
(a) P12: 205mm x (200, 400, 600, 800)mm ‘Rous Ridge’ basalt paver, bright etched finish;
(b) P13: 205mm x (200, 400, 600, 800)mm ‘Misty Cloud’ paver, flamed finish.
Paving type P3
Match existing.
Main Paver Material: 415mm x (200, 400, 500, 600, 700,800, 900, 1000)mm ‘Oyster Pearl” granite paver, flamed finish
Highlight Pavers: (P12) 415mm x 1000mm ‘Rous Ridge’ basalt paver, bright etched finish.
Paving type P4
Match existing.
Main Paver Material: 615mm x 1000mm ‘Oyster Pearl” granite paver, flamed finish.
Highlight Pavers:
(a) P12: 205mm x 500mm ‘Rous Ridge’ basalt paver, bright etched finish;
(b) P13: 205mm x1m ‘Misty Cloud’ paver, flamed finish;
(c) P4: 404mm x 1m‘ Oyster Pearl” granite paver, flamed finish.
Paving type P5/P6
Match existing.
Paver Material: 620mm x 1.520m typical ‘Rous Ridge’ basalt paver, bright etched finish.
Paving type P7
Match existing.
Paver Material: 400mm x 1m typical ‘Rous Ridge’ basalt paver, bright etched finish.
Paving type P10
Match existing.
Paving type P14
Match existing.
Paver Material: 100mm x (195, 400, 600)mm ‘Rous Ridge’ basalt paver, bright etched finish.
Paving type P15
Match existing.
Main Paver Material: 100mm x (195, 400, 600)mm ‘Oyster Pearl’ paver, flamed finish.
Highlight Pavers:
(a) P12: 100mm x 400mm ‘Rous Ridge’ basalt paver, bright etched finish;
(b) P13: 100mm x 600mm ‘Misty Cloud’ paver, flamed finish.
Paving type P17
Match existing.
Paver Material: 100mm x 300mm ‘Rous Ridge’ basalt paver, bright etched finish.
Tactile markers
(consistent with BSD-5218)
Match existing.
Driveways
Honed coloured concrete to match footway
Furniture
All furniture is to be located outside of the unobstructed pavement area.
Furniture elements and layout requirements are to be agreed on a site by site basis through the development assessment process.
Refer to 3.7.6 Design standards for street furniture for standard furniture elements and specifications.
Trees
Garden beds
None.

View Image

View Image

5.3.3.1.3.5 Type 4 - Locality streetscape specifications (Brisbane Square and Reddacliff Place)

The streetscape specifications for Type 4 Locality Street are outlined in Table 5.3.3.1.3.5A and shown in Figure 5.3.3.1.3.5a.

Table 5.3.3.1.3.5A – Streetscape type and specifications
Component
Type 4 - Design specifications
Verge width
5m
Pavement width
Full width pavement
Unobstructed pavement
2.4m
Paving Material – Body
Main paving type (SN02) - Match existing.
Material: (595x295), (595x197), (295x295), (295x197)mm Sindoor Brown granite paver, exfoliated finish
Highlight Panel
Highlight paving ‘piano keys’ (SN04) - Match existing.
Material: (595x295), (595x197), (295x295), (295x197)mm Indian Black granite, exfoliated finish
Tactile markers
(consistent with BSD-5218)
Tactiles to match existing - match Indian Black exfoliated granite paver
Driveways
Match existing.
Material: Type SN02 - (595x295), (595x197), (295x295), (295x197) mm Sindoor brown granite paver, exfoliated finish
Type SN04 (595x295), (595x197), (295x295), (295x197) mm Indian Black granite, exfoliated finish
Furniture
All furniture is to be located outside of the unobstructed pavement area.
Furniture elements and layout requirements are to be agreed on a site by site basis through the development assessment process.
Refer to 3.7.6 Design standards for street furniture for standard furniture elements and specifications.
Trees
Garden beds
None.

View Image

5.3.3.1.3.6 Type 5 - Locality streetscape specifications (Queen Street Mall)

The streetscape specifications for Type 5 Locality Street are outlined in Table 5.3.3.1.3.6A and shown in Figure 5.3.3.1.3.6a.

Table 5.3.3.1.3.6A – Streetscape type and specifications
Component
Type 5 - Design specifications
Verge width
As existing
Pavement width
Full width pavement
Unobstructed pavement
2.4m
Queen Street - Main Body Paver
Supplier and processing: Australian Granites Pty Ltd; J Wagner & Sons or approved equivalent
Material: Granite
Colour: ‘Midnight Rose’
Size: (597x297x50), (297x297x50)mm
Finish: exfoliated
Queen Street - Band Contrast Paver
Randomly spread at a 1:20 ratio.
Supplier and processing: Australian Granites Pty Ltd; J Wagner & Sons or approved equivalent
Material: Granite
Colour: ‘Adelaide Black’
Size: 297mm x 297mm x 55mm
Finish: exfoliated
Queen Street ‘Procession Way’ pavers
Supplier and processing: Australian Granites Pty Ltd; J Wagner & Sons or approved equivalent
Material: Granite
Colour: ‘Midnight Rose’
Size:
(a) Main paver 297mm x 297mm x 50mm
(b) Central Lateral Line 297mm x 97mm x 50mm
Finish: exfoliated
Albert Street - Paving type main body paver
Material: Granite
Colour: Sindoor Brown
Size: (597x297x50)mm, (297x297,50)mm
Finish: exfoliated
Layout: to match Queen Street area of the mall
Albert Street - Vehicle movement areas and cross overs
Match existing Queen Street ‘Procession Way’ paving type
Layout: to match Queen Street area of the mall
Tactile markers
(consistent with BSD-5218)
Supplier: Boral
Material: Concrete ‘Stylestone’ or approved equivalent
Colour: Charcoal Black
Size: 300mm x 300mm x 55mm
Driveways
Honed coloured concrete to match footway.
Furniture
All furniture is to be located outside of the unobstructed pavement area.
Furniture elements and layout requirements are to be agreed on a site by site basis through the development assessment process.
Refer to 3.7.6 Design standards for street furniture for standard furniture elements and specifications.
Trees
Garden beds
None.

View Image

5.3.3.1.3.7 Type 6 - Locality streetscape specifications (Post Office Square)

The streetscape specifications for Type 6 Locality Street are outlined in Table 5.3.3.1.3.7A and shown in Figure 5.3.3.1.3.7a.

Table 5.3.3.1.3.7A – Streetscape type and specifications
Component
Type 6 - Design specifications
Verge width
As existing
Pavement width
Full width pavement
Unobstructed pavement
2.4m
Main body
paving type (PT1)
Match existing.
Supplier: The Tile Factory or approved equivalent
Material: Granite paver
Code: HG6013
Size: 895mm x 595mm x 30 mm
Finish: exfoliated
Banding
paver type (PT2)
Match existing.
Supplier: The Tile Factory or approved equivalent
Material: Granite paver
Code: HG6007
Size: 695mm x 395mm x 30 mm
Finish: exfoliated
Diagonal detail
paver type (PT3)
Match existing.
Supplier: The Tile Factory or approved equivalent
Material: Granite paver
Code: HG6016
Size: 295mm x 595mm x 30 mm
Finish: exfoliated
Finish: honed
Banding paver type (PT4)
Match existing.
Supplier: Boral or approved equivalent
Material: concrete paver
Colour: Boral ‘grey’
Size: 400mm x 400 mm
Finish: honed
Infill panel paver type (PT5)
Match existing.
Supplier: Boral or approved equivalent
Material: concrete paver
Colour: Boral ‘ivory’
Size: 400mm x 400 mm
Tactile markers
(consistent with BSD-5218)
Type: Concrete tactile pavers
Supplier: ‘Chelmstone’, ‘Urbanstone’ or approved equivalent
Colour: CCS ‘Voodoo'
Driveways
Honed coloured concrete to match footway.
Furniture
All furniture is to be located outside of the unobstructed pavement area.
Furniture elements and layout requirements are to be agreed on a site by site basis through the development assessment process.
Refer to 3.7.6 Design standards for street furniture for standard furniture elements and specifications.
Trees
Garden beds
None.

View Image

5.3.3.1.3.8 Type 7 - Locality streetscape specifications (GPO Precinct)

The streetscape specifications for Type 7 Locality Street are outlined in Table 5.3.3.1.3.8A and shown in Figure 5.3.3.1.3.8a.

Table 5.3.3.1.3.8A – Streetscape type and specifications
Component
Type 7 - Design specifications
Verge width
As existing
Pavement width
Full width pavement
Unobstructed pavement
2.4m
Main body paving type (PT1)
Match existing.
Supplier: The Tile Factory or approved equivalent
Material: Granite paver
Code: HG6013
Size: 895mm x 595mm x 30 mm
Finish: exfoliated
Banding paver type (PT2)
Match existing.
Supplier: The Tile Factory or approved equivalent
Material: Granite paver
Code: HG6007
Size: 695mm x 395mm 30 mm
Finish: exfoliated
Tree square detail paver type (PT4)
Match existing.
Supplier: The Tile Factory or approved equivalent
Material: Granite paver
Code: HG6052
Size: 585mm x 585mm x 30mm
Finish: Honed – light sand blast
Corner detail paver – tree pit (PT6)
Match existing.
Supplier: The Tile Factory or approved equivalent
Material: Granite paver
Code: HG332
Size: 585mm x 585mm x 30mm
Finish: Honed – light sand blast
Pedestrian ramp tactiles (PT8)
Match existing.
Supplier: The Tile Factory or approved equivalent
Material: Granite paver
Code: HG6007
Size: 395mm x 395mm x 30 mm
Finish: exfoliated
Diagonal detail paver type (PT3)
Match existing
Supplier: The Tile Factory or approved equivalent
Material: Granite paver
Code: HG6016
Size: 295mm x 595mm x 30 mm
Finish: exfoliated
Corner detail paver (PT5)
Match existing.
Supplier: The Tile Factory or approved equivalent
Material: Granite paver
Code: HG332
Size: 585mm x 585mm x 30mm
Finish: Honed – light sand blast
Banding manor apartment/ Suncorp Metway (PT7)
Match existing.
Supplier: The Tile Factory or approved equivalent
Material: Granite paver
Code: HG6013
Size: 395mm x 395mm x 30 mm
Finish: exfoliated
Tactile markers
(consistent with BSD-5218)
Type: Concrete tactile pavers
Supplier: ‘Chelmstone’, ‘Urbanstone’ or approved equivalent
Colour: CCS ‘Voodoo'
Driveways
Honed coloured concrete to match footway.
Furniture
All furniture is to be located outside of the unobstructed pavement area.
Furniture elements and layout requirements are to be agreed on a site by site basis through the development assessment process.
Refer to 3.7.6 Design standards for street furniture for standard furniture elements and specifications.
Trees
Garden beds
None.

View Image

5.3.3.1.3.9 Type 8 - Locality streetscape specifications (Eagle Street Precinct)

The streetscape specifications for Type 8 Locality Street are outlined in Table 5.3.3.1.3.9A and shown in Figure 5.3.3.1.3.9a.

Table 5.3.3.1.3.9A – Streetscape type and specifications
Component
Type 8 - Design specifications
Verge width
5m
Pavement width
Full width pavement
Unobstructed pavement
2.4m
Pedestrian pavement
Match existing.
Supplier: Tilecorp or approved equivalent
Material: Italian Porphyry
Size & Finish: match existing
Pedestrian pavement highlight band
Match existing.
Supplier: Tilecorp or approved equivalent
Material: Travertine banding
Size & Finish:
match existing
Pedestrian pavement highlight band
Match existing.
Supplier: Tilecorp or approved equivalent
Material: Italian Porphyry banding
Size & Finish:
match existing
Tactile markers
(consistent with BSD-5218)
Type: Concrete tactile paver
Supplier: Chelmstone, Urbanstone or approved equivalent
Colour: CCS ‘Pewter’
Driveways
Honed coloured concrete to match footway.
Furniture
All furniture is to be located outside of the unobstructed pavement area.
Furniture elements and layout requirements are to be agreed on a site by site basis through the development assessment process.
Refer to 3.7.6 Design standards for street furniture for standard furniture elements and specifications.
Trees
Garden beds
None.

View Image

5.3.3.1.3.10 Type 9 - Locality streetscape specifications (Gardens Point Road)

The streetscape specifications for Type 9 Locality Street are outlined in Table 5.3.3.1.3.10A and shown in Figure 5.3.3.1.3.10a.

Table 5.3.3.1.3.10A – Streetscape type and specifications
Component
Type 9 - Design specifications
Verge width
As existing
Pavement width
Full width pavement
Unobstructed pavement
2.4m
Honed saw cut concrete (PT1)
Match existing.
Supplier: Hanson (Racona - code 10040798) or approved equivalent
Material: Concrete
Style: Kolormasta
Colour: Concrete Colour Systems ‘liquorice’ or approved equivalent
Aggregate: 90% ‘Blue Heeler’/ 10% ‘Winter Brown’
Finish: Honed, saw cut pattern
Granite pavers fixed on concrete slab (PT2)
Match existing.
Supplier: Urbanstone or approved equivalent
Material: 600x400x40mm Granite Pavers
Colour: Juperana (colour of pavers to be approved )
Finish: Exfoliated and sealed - Crommelin Stain Repel
Layout Pattern:
Stretcher bond – set out to match existing
Broom finished concrete (PT3)
Match existing.
Portland grey concrete
Finish: Broom finish
Porous paving (PT4)
Match existing.
Supplier: Stoneset
Material: 70mm Porous Paving – 6mm crushed rock
Colour: to match existing or approved equivalent
Tactile markers
(consistent with BSD-5218)
Type: Concrete paver 300 x 300mm
Supplier: ‘Chelmstone’, ‘Urbanstone’ or approved equivalent
Colour: CCS 'Voodoo'
Driveways
Honed coloured concrete to match footway.
Furniture
All furniture is to be located outside of the unobstructed pavement area.
Furniture elements and layout requirements are to be agreed on a site by site basis through the development assessment process.
Refer to 3.7.6 Design standards for street furniture for standard furniture elements and specifications.
Trees
Garden beds
None.

View Image

5.3.3.1.3.11 Type 10 - Locality streetscape specifications (Park edge)

The streetscape specifications for Type 10 Locality Street are outlined in Table 5.3.3.1.3.11A.

Table 5.3.3.1.3.11A – Streetscape type and specifications
Component
Type 10 - Design specifications
Verge width
As existing
Pavement width
Full width pavement
Unobstructed pavement
2.4m
Paving materials
Type: Honed coloured concrete with sawcut pattern.
Supplier: Hanson (code 10050284), Boral or approved equivalent.
Colour: CCS ‘Liquorice’ 90% ‘Blue Heeler’ + 10% ‘Winter Brown’
Tactile markers
(consistent with BSD-5218)
Type: Concrete tactile pavers
Supplier: Chelmstone, Urbanstone or approved equivalent
Colour: CCS ‘Voodoo’
Driveways
Honed coloured concrete to match footway
Furniture
All furniture is to be located outside of the unobstructed pavement area.
Furniture elements and layout requirements are to be agreed on a site by site basis through the development assessment process.
Refer to 3.7.6 Design standards for street furniture for standard furniture elements and specifications.
Trees
Refer to 5.3.3.1.4 Planting.
Garden beds
Garden beds – minimum widths: 1.6m.
A garden bed located adjacent to the kerb has a:
(c) 1.5m minimum spacing between garden beds;
(d) Maximum length of 10m;
(e) Layout and length to accommodate car parking and other kerbside allocation.

5.3.3.1.3.12 Type 11 - Locality streetscape specifications (Albert Street)

The streetscape specifications for Type 11 Locality Street are outlined in Table 5.3.3.1.3.12A.

Table 5.3.3.1.3.12A – Streetscape type and specifications
Component
Type 11 - Design specifications
Verge width
5m
Pavement width
Full width pavement
Unobstructed pavement
2.4m
Paving materials
Type: Honed coloured concrete with sawcut pattern.
Supplier: Hanson (code 10050284), Boral or approved equivalent.
Colour: CCS ‘Liquorice’ 90% ‘Blue Heeler’ + 10% ‘Winter Brown’
Tactile markers
(consistent with BSD-5218)
Type: Concrete tactile pavers
Supplier: Chelmstone, Urbanstone or approved equivalent
Colour: CCS ‘Voodoo’
Driveways
Honed coloured concrete to match footway
Furniture
All furniture is to be located outside of the unobstructed pavement area.
Furniture elements and layout requirements are to be agreed on a site by site basis through the development assessment process.
Refer to 3.7.6 Design standards for street furniture for standard furniture elements and specifications.
Trees
Refer to 5.3.3.1.4 Planting
Garden beds
Garden beds – minimum widths: 1.6m.
A garden bed located adjacent to the kerb has a:
(f) 1.5m minimum spacing between garden beds;
(g) Maximum length of 10m;
(h) Layout and length to accommodate car parking and other kerbside allocation and footpath dining provision.

5.3.3.1.4 Planting

View Image

5.3.3.1.4.1 Street trees

(1) Street trees are permitted in all streets within the City Centre as determined on a site-by-site basis.
(2) Table 5.3.3.1.4.3A sets out the approved street tree species for use on the various streets within the City Centre.
(3) Street trees are to be planted with 1.6m x 1.6m tree grates where footway width permits.
(4) Elsewhere, 1.615m long x 1.21m tree grates are to be used, as per Figure 5.3.3.1.4a.
(5) The layout of street trees is as follows:
(a) a mix of species, in a single row at the rear of kerb;
(b) to be planted as singles and in pairs or clusters.
(6) Trees are planted in garden beds or tree grates.
(7) All tree centrelines are 750mm from the nominal face of the kerb and a minimum of 600mm from the edges of the pavement.
(8) Streets in the City Centre include:
(a) a mix of tree species laid out in an informal manner with clusters of trees;
(b) medium and small crown trees to be planted at minimum 2m spacing, if within garden beds, or minimum 6m spacing outside of garden beds;
(c) large crown feature trees to be planted at minimum 10m centres.

5.3.3.1.4.2 Traffic islands

(1) There are a number of locations in the City Centre where there are large traffic islands populated by very well-established trees – including figs and jacarandas.
(2) Table 5.3.3.1.4.3B provides a list of street tree species for traffic islands.

5.3.3.1.4.3 Garden beds

The high volume of pedestrian traffic makes the application of garden beds unsuitable for most parts of the City Centre, with the exception of Albert Street and Wickham Terrace, where garden beds are supported.

(1) Shrub and groundcover species are to be selected from Table 5.3.3.1.4C.

.

Table 5.3.3.1.4.3A—Street trees
Street
Street trees
Adelaide Street – between Boundary and Queen Streets
Waterhousia floribunda
Adelaide Street – between Queen and Edward Streets
Flindersia brayleyana
Adelaide Street – between Edward Street and North Quay
Caesalpinea ferrea
Albert Street – between Alice and Elizabeth Streets
Colvillea racemosa
Flindersia australis
Flindersia brayleana
Grevillea baileyana Hymenosporum flavum
Albert Street – between Elizabeth and Adelaide Streets
Waterhousia floribunda
Alice Street roundabout junction with Edward Street
Jacaranda mimosifolia
Alice Street – western side, between Edward and George Streets

Note: Overhanging mature figs along the edge of the City Botanic Gardens preclude planting on the eastern side of the street.

Agathis robusta
Alice Street – between George and William Streets
Agathis robusta
Ann Street
Flindersia australis
Charlotte Street – between George and Edward Streets
Flindersia australis
Charlotte Street – between Edward and Eagle Streets
Harpullia pendula
Creek Street – between Charlotte and Elizabeth Streets
Agathis robusta & Bauhinia variegata
Creek Street – between Elizabeth and Adelaide Streets
Flindersia brayleyana & Bauhinia variegata
Creek Street – between Adelaide and Ann Streets
Bauhinia variegata
Eagle Street
Agathis robusta
Edward Street – between Turbot Street and Wickham Terrace
Tabebuia impetiginosa
Edward Street – between Turbot and Ann Streets
Bauhinia variegata & Tabebuia impetiginosa
Edward Street – between Ann and Adelaide Streets
Bauhinia variegata
Edward Street – between Adelaide and Mary Streets
Waterhousia floribunda
Edward Street – between Mary and Margaret Streets
Harpullia pendula & Bauhinia variegata
Edward Street – between Margaret and Alice Streets
Harpullia pendula
Elizabeth Street – between Creek and George Streets
Harpullia pendula
Elizabeth Street – between George and William Streets
Syagrus romanzoffiana
Felix Street
Harpullia pendula
Garrick Street
Agathis robusta
George Street – between Roma and Alice Streets
Flindersia australis
Podocarpus elatus
Syagrus romanzoffiana
Waterhousia floribunda
Herschel Street
Jacaranda mimosifolia
Howard Street
Harpullia pendula
Makerston Street
Agathis robusta
Margaret Street – between North Quay and Edward Street
Harpullia pendula
Margaret Street – between Edward and Felix Streets
Agathis robusta
Market Street
Elaeocarpus obovatus
Xanthostemon chrysanthus
Mary Street – between Eagle and Edward Streets
Harpullia pendula
Mary Street – between Edward and George Streets
Harpullia pendula
Elaeocarpus obovatus
May Street
Agathis robusta
North Quay – northern side
Araucaria cunninghamii
North Quay – southern side
Elaeocarpus obovatus
Queen Street – between Boundary and Adelaide Streets
Flindersia australia Waterhousia floribunda
Queen Street – between Wharf and Creek Streets
Agathis robusta
Queen Street –between Creek and Edward Streets
Agathis robusta
Harpullia pendula
Livingstonia australis
Queen Street – between George Street and North Quay
Waterhousia floribunda
Roma Street Boulevard
Araucaria cunninghamii
Ficus spp.
Saul Street
Araucaria cunninghamii
Tank Street
Podocarpus elatus
Turbot Street – between Wharf and Raff Streets
Flindersia schottiana & Tabebuia impetiginosa
Turbot Street – between Edward and Albert Streets
Agathis robusta
Turbot Street –between Albert Street and North Quay
Flindersia schottiana
Upper Albert Street
Colvillea racemosa
Flindersia australis
Flindersia brayleana
Grevillea baileyana
Hymenosporum flavum
Wickham Terrace – northern side between Edward and Turbot Streets
Harpullia pendula
Wickham Terrace – northern side between Edward and Albert Streets
Flindersia australis
Agathis robusta
Ficus benjamina
Araucaria cunninghamii
Wickham Terrace – between Albert and Leichhardt Streets
Araucaria cunninghamii
Agathis robusta
Ficus benjamina
Elaeocarpus eumundi
Flindersia schottiana
Colvillea racemosa
Wickham Terrace – between Leichhardt Street and Gregory Terrace
Flindersia schottiana
Ficus microcarpa var. Hillii
Colvillea racemosa
Wharf Street – between Turbot and Ann Streets
Agathis robusta
Wharf Street – between Ann and Queen Streets
Flindersia Australis
Flindersia brayleyana
William Street between Alice and Queen Streets
Syagrus romanzoffiana
Bauhinia variegata
Queen’s Gardens Park – George, Elizabeth and William Street frontages
Syagrus romanzoffiana
Table 5.3.3.1.4.3B—Traffic island street trees
Street Intersection
Street Trees
Creek, Elizabeth and Eagle Streets
Ficus virens and Ficus benghalensis
North Quay and Skew Streets
Ficus sp. and Jacaranda mimosifolia
Queen and Eagle Streets
Ficus benjamina
Skew and Saul Streets
Ficus sp. and Jacaranda mimosifolia
Table 5.3.3.1.4.3C—Shrub and groundcover species
Shrub and groundcover species
Common name
Dianella sp.
Dianella
Liriope ‘Evergreen Giant’
Liriope
Liriope ‘Stripey White’
Variegated Liriope
Trachelospermum jasminoides ‘Tricolour’
Variegated Star Jasmine
^ Back to Top