watermark Cannon Hill Location and extent

The location and extent of the Locality streets in the Cannon Hill Suburban Centre Improvement Project (SCIP) are identified in Figure and in the Streetscape hierarchy overlay map.

View Image Locality street specifications

(1) The design specifications for footway surfacing for the Locality streets in the Cannon Hill SCIP are identified in Table
(2) These locality guidelines are to be read in conjunction with Chapter 3 – Road corridor design of the Infrastructure design planning scheme policy.
(3) Footway upgrades are to include new surfacing, new or reinstated kerb and channel, driveways, pedestrian kerb crossings, tactile markers, roof water drainage line connections, service pit lids, street trees, garden beds, furniture and pedestrian lighting applicable to the streetscape type.
(4) The scope, layout and detail of the footway upgrades are to be agreed on a site by site basis through the development assessment process.
Table—Cannon Hill SCIP Locality streetscape type and specifications
Design specifications
Verge width
As existing.
Full width pavement
Unobstructed pavement width
Paving materials
Type: Exposed aggregate concrete
Supplier: Hanson or approved equivalent
Colour: Honey Red
Tactile markers
(consistent with BSD-5218)
Type: Concrete paver
Supplier: Chelmstone or approved equivalent
Colour: CCS 'Voodoo'
To match adjacent footpath finish.
All furniture is to be located outside of the unobstructed pavement area.
Finish: Powdercoat
Paint colour and finish: Dulux ‘Metropolis Storm Pearl’ (88471) in ‘Satin’ finish, or approved equivalent.
Urban stools
Finish: Precast grey concrete
Supplier: Urban Fountains and Furniture, or approved equivalent
Colour: CCS ‘Mulberry’, CCS ‘Kelp’, CCS ‘Eucalyptus’
All tree centrelines are 750mm from the nominal face of the kerb and a minimum of 600mm from the edges of the pavement.
Streets trees include:
(a) a mix of tree species laid out in an informal manner with clusters of trees;
(b) medium and small crown trees to be planted at minimum 2m spacing, if within garden beds, or minimum 6m spacing outside of garden beds;
(c) large crown feature trees to be planted at minimum 10m centres.
(a) a mix of species, in a single row at the rear of kerb;
(b) to be planted as singles and in pairs or clusters.
Planting: Trees are planted in garden beds or tree grates (1.6m x 1.2m minimum).
Garden beds
A garden bed located adjacent to the kerb has a:
(a) 1.5m minimum spacing between garden beds;
(b) maximum length of 10m;
(c) layout and length to accommodate car parking and other kerbside allocation.
Garden bed minimum width: 1.2m Preferred plant species

The preferred plant species for the Locality streets in Cannon Hill are stated in Table

Table—Plant species
Shrubs and groundcovers
Araucaria cunninghamii
Flindersia australis
Grevillea robusta
Lophostemon confertus
Melaleuca quinquenervia
Tabebuia argentea
Xanthostemon chrysanthus
Alpinia zerumbet ‘Variegata Dwarf’
Cordyline stricta
Hymenocallis littoralis
Liriope ‘Evergreen Giant’
Liriope ‘Stripey White’
Lomandra hystrix
Philodendron xanadu
Strelitzia reginae
Tulbaghia violacea ‘Alba’
Trachelospermum jasminoide
^ Back to Top